http://www.imgetnmarried.com/satin-applique/
Thanks for visiting our site!
Satin Applique
Checkout Ebay Auctions For The Cheapest Prices
 |
 SATIN Communion Dress w/ Ribboned Appliques (Sz 5 - 14)  US $90.00
|
SATIN Communion Dress w/ Ribboned Appliques (Sz 5 - 14) US $90.00
|
| Powered by phpBay Pro |
Here are some more information for Satin Applique:
In The Hoop (ITH) Projects
In-the-hoop projects are very similar in many ways to appliqué embroidery designs done in the hoop. Both have a placement stitching line, a tack down line, followed normally by detailing and a satin stitch outline. Depending upon the design, there may be only one set of placement and tack down lines or there may be a few sets of them—but they are similar. From my experience working in a store, I've seen many people avoid appliqué and/or in-the-hoop projects simply because they think they might be too difficult for them. So let's demystify some of those steps.
First, tutorials are included with in-the-hoop projects giving you step-by-step instructions by most if not all digitizers. If you take it one step at a time you'd be surprised how simple and fun they can be. The added benefit of an in-the-hoop project is that once it's out of the hoop, generally it's all done. It's a quick way to get a feeling of accomplishment pulling a finished project out of the hoop--great for those of you who don't have a lot of time to sew.
In-the-hoop projects start off with a "placement" stitch. It really doesn't matter what color of thread you use for the placement stitch. The placement stitch won't show in the completed project because it will be covered by other stitches. It's just a stitch to give you a visual of where to place the material (the instructions will tell you what type of material to place down, i.e., fabric, batting, etc.). The machine will automatically stop allowing you time to put your material down just like it stops for any other color change. That's why the digitizer made this placement line a different color—so the machine will know when to stop.
After placing the material over the placement line, the second step is normally a "tack down" stitch. The tack down stitch will hold down that material in place so it doesn't shift. After the tack down is complete, you'll want to take the hoop out of the machine but not the material out of the hoop and trim very closely to the stitching. (Again, the color of the thread doesn't matter as the color change is there so that the machine would know when to stop so you can trim.) Once you've trimmed the material, you'll place the hoop back into the machine to complete the design. More often than not, you'll be given instructions at some point to wind a bobbin with matching thread for the top as well as bobbin for a satin stitch which can be seen on both sides.
Depending upon the in-the-hoop project, I like to use a wash away stabilizer. When the machine embroidery design is complete I can either throw it in the wash or use a stencil cutter to melt away the stabilizer giving the satin stitch edge a clean and tidy finish. Tear away stabilizers have a tendency to leave little pokies of stabilizer bits sticking out from the satin stitching when pulled away. (Tip: If this has happened to you, use a "cover up" pen matching the color you used on the satin stitching and color the pokies.)
I've included a free sample Luggage Spotter project for you to try your hand at an in-the-hoop project. It only takes 2, 6" pieces of fabric, 1, 6" piece of batting, embroidery thread, and an ¼" wide elastic head band (or shoe string) to complete the project. Complete step-by-step instructions with photos are included. Should you have any questions along the way, just write me and I'll try to get you past the hump.
Every in-the-hoop project will have some similarities. Some will be more involved than others but they'll all have a placement line, tack down stitches, and then your final embroidery detailing.
About the Author
World's largest selection of Embroidery Designs available at OPW Embroidery Design Gallery. An online one stop gallery for best quality embroidery designs. We have professional embroidery designers at OPW Mall experts in providing high quality machine embroidery designs, supplies and services.
My hubby ordered me a Singer ses1000.?
Am I gonna be able to do appliques on it? it says it has the satin stitch option but I cant find anything that says that I can do it?
You will be far more likely to find someone who knows about your machine on a forum such as patternreview. It doesn't appear to cost anything to join and participate. I've posted a link to a topic where your machine was discussed last year.
Don
Aunt Norie's Sewing Room
In today’s world, saving every way we can, garage sales and their popularity are real blessings to so many. There also are many shops buying and selling used clothes. One can find some great buys there.
Thanks for visiting!